Lift Kit Installation in North Phoenix

Services · 02 of 13

Lift Kit Installation in North Phoenix

Lift kits and leveling kits for trucks and SUVs, installed and aligned at our Deer Valley shop in north Phoenix.

Quick answer

Where can I get a lift or leveling kit installed in North Phoenix?

Luxe Motorsports installs lift kits and leveling kits for trucks and SUVs at 747 W Pinnacle Peak Rd in Deer Valley, North Phoenix. A leveling kit raises the front to match the rear; a lift raises the whole vehicle for clearance and a larger tire. Every install finishes with an alignment, a torque check and a headlight aim, and heights are quoted per kit and per truck.

Shop
Luxe Motorsports, 747 W Pinnacle Peak Rd, Ste A105, Phoenix, AZ 85027
Area
Deer Valley, North Phoenix; a short drive from north Scottsdale, Anthem and Peoria
Vehicles
Trucks and SUVs
Hours
Mon–Fri 9:00 AM – 4:00 PM; Sat/Sun Closed

Lifts and leveling

Raise the front, or raise the whole truck.

Silverado 2500 after a Cognito 3-inch level, Fox 2.0 shocks, and 37-inch tires

What this service is.

Most trucks leave the factory with a slight rake: the front sits lower than the rear so a loaded bed stays level. A leveling kit raises the front to meet the rear. The stance evens out, a modestly larger tire often fits, and the truck looks planted instead of nose-down.

A lift kit raises the whole vehicle. That is the path when you want more clearance, a 35- or 37-inch tire, or room for the suspension to travel off-road. Heights are quoted per kit and per truck, not as a one-size number. We install both in the Deer Valley shop, then align the vehicle before it leaves.

Leveling, lift kits, and coilover conversions.

The right choice depends on how you use the truck, what tire you want, and how much you want the ride to change. We will say which way we would go once we know the vehicle.

01

Leveling kit

Raises the front to match the rear, typically around 2 to 3 inches depending on the kit. The ride stays closer to stock when the shocks are matched to the new height. Common when you want to lose the rake, fit a slightly larger tire, or even out a truck that tows.

  • Typical front height: about 2–3 inches, per kit
  • Often paired with a modestly larger tire
  • Shorter shop visit than a full lift

02

Lift kit

Raises the whole truck for clearance and a larger tire. A 4-inch or 7-inch kit is a different job from a level: more parts, more time, and a larger change in alignment, driveline angles, and the way the truck sits and steers. We confirm fitment for the wheel and tire before we schedule it.

  • Quoted per kit and per truck, not as a fixed height
  • Planned around the tire you actually want
  • Fender work and steering extras when the kit needs them

03

Coilover conversion

Replaces the front spring and shock with a coilover so the front end can be set and valved for how you drive. We install coilover conversions and serviceable Fox and King shocks, including custom valving when that is part of the plan. This is not a spacer on top of the factory spring.

  • Front-end control and ride are the point
  • Height is set with the kit, not guessed
  • Shock rebuilds and valving are quoted separately
GMC Sierra 2500 AT4 on a Cognito 7-inch lift with Fox remote-reservoir shocks

Who it is for.

This is everyday work on the trucks we see in north Phoenix: Silverado and Sierra 2500, F-250 and F-350, and SUVs like the Yukon when a level makes more sense than a full lift. Daily drivers, tow rigs, and off-road trucks all come through the same Deer Valley bay.

If you commute on the 101 and still want a 37-inch tire for weekends, say that up front. A level and a 7-inch lift solve different problems, and the wrong one is expensive to undo. Drivers coming from north Scottsdale, Anthem, or Peoria use the same shop: 747 W Pinnacle Peak Rd, Ste A105, open Monday through Friday, 9 to 4.

Cognito knuckle and Fox shock after a level-kit install in the shop

What the install includes.

We install the kit, check fitment for the wheel and tire, and finish with a post-install alignment, a torque check, and a headlight aim. You get a walk-through before you leave, including when to come back for a re-torque after the first stretch of miles.

How long it takes depends on the kit and the truck. A front-end level is usually a shorter shop day than a full lift with coilovers, fender work, and a new tire size. We give you a timeline for your truck when we write the quote.

What affects the quote

  • The kit and shock package, and whether it is a level, a lift, or a coilover conversion
  • Height, plus any fender pull-back, steering, or driveline parts the truck needs
  • Whether wheels and tires are changing at the same time
  • The condition of the existing suspension on a used truck
  • Other shop work booked with it, such as wheels, tint, or film, so we can sequence the days

Call or request a quote with the year, make, model, and the height or tire you want.

From the shop

Lift and leveling work we have done.

White Sierra AT4 after a Cognito 3-inch level with Fox 2.5 Elite shocks and 37-inch Toyo MTs
White F-250 after a Carli level pintop kit with King shocks and 37-inch tires
Tire clearance on a Sierra 2500 after a Cognito 7-inch lift and 40-inch Toyo MTs

How a lift or level gets done here.

  1. Step 01

    Talk

    Call or request a quote. Tell us the year, make, and model, how you use the truck, the height you have in mind, and whether a new wheel and tire are part of the plan.

  2. Step 02

    Plan

    We confirm the kit, shocks, fitment, and price, and we tell you how long the truck will be in the bay. If the tire size only works with a lift, we say so before you book a level.

  3. Step 03

    Install

    The work happens at the Deer Valley shop. When the kit is on, we align the truck, torque the hardware, and aim the headlights so the new height does not leave you driving with the lamps in someone else’s mirror.

  4. Step 04

    Hand-off

    We walk you through the finished truck and the aftercare: when to come back for a re-torque, what rubbing would mean in the first miles, and who to call if the alignment feels off after it settles.

White F-350 after a BDS coilover conversion with Fox 2.5-inch coilovers and 37-inch tires

After it leaves the shop.

New lift and level hardware needs a re-torque after the first stretch of miles. We tell you when to bring it back. If the truck starts to pull, or a tire rubs on full lock, call us before you assume it will wear in.

Why do this at Luxe: the kit, the alignment, and the torque check happen in one Deer Valley shop. We install kits we have already put on Silverados, Sierras, F-250s, and F-350s in this climate, including Cognito, BDS, Fox, King, Carli, ReadyLift, and ICON when that is the right kit for the truck. Ask when you call, and we will confirm the right brand for your vehicle.

Questions about lifts and leveling.

What is the difference between leveling and a lift?

Leveling raises the front to match the rear, usually around 2 to 3 inches depending on the kit. A lift raises the whole vehicle for more clearance and a larger tire. The two are different jobs, and we will tell you which one fits the height and tire you want.

Do I need new tires with a lift or a level?

Not always. A level sometimes works with the tires you have, or with a modestly larger size. A taller lift is usually planned around a specific tire. We check fitment when we quote it. See also wheels and tires.

Will a lift or level affect my warranty?

Policies vary by manufacturer and dealer. Ask yours. We will explain exactly what we install so you can have that conversation with a clear parts list.

How long does the install take?

It depends on the kit and the truck. A front-end level is usually a shorter shop day than a full lift with coilovers, fender work, and a new tire. We give you a timeline when we write the quote.

Do you align the truck after the install?

Yes. A post-install alignment, a torque check, and a headlight aim are part of the job. We also tell you when to come back for a re-torque after the first stretch of miles.

Get a quote

Bring us the vehicle.

Mon–Fri 9:00 AM – 4:00 PM; Sat/Sun Closed

Visit the shop

Lift kits and leveling in north Phoenix and Deer Valley.

Luxe Motorsports is on Pinnacle Peak Rd in the Deer Valley area of north Phoenix, a short drive from north Scottsdale, Anthem, and Peoria. Stop by on a weekday, or call and talk through the vehicle.

Luxe Motorsports 747 W Pinnacle Peak Rd, Ste A105 Phoenix, AZ 85027 (602) 900-0720 Sales@LuxeMotorsportsAZ.com Mon–Fri 9:00 AM – 4:00 PM; Sat/Sun Closed